Precision-turbo-and-engine BigStuff3 GEN3 PRO SEFI System Hardware & BigC Manual de usuario Pagina 40

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 138
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 39
BigStuff3 Pro SEFI System
Version 2.1 – February 2011 33
Lastly, if you want to open software put a check mark in the box next to Launch BigComm, as shown
below.
Connecting to the PC
The BigComm software has now been successfully installed on your personal computer!
A 5’communication cable connects the BigStuff3 ECU with a personal computer (PC). A 25’ cable is
also available from BigStuff3.
Using the communication cable supplied with the system, connect the 3-way Packard connector to the
mating half 3-way connector marked CalPort on the Main Wire Harness.
Connect the RS232 connector to the back of the personal computer.
Vista de pagina 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 137 138

Comentarios a estos manuales

Sin comentarios